Stainless Fasteners and Hardware

Find the Right Fasteners and Hardware

Filter by type and size to find the hardware for your project.

Stainless Fasteners and Hardware

Fasteners may be small, but they hold together many of the most important parts of a boat installation. Choosing the right size and material matters.

What to Consider

Browse stainless steel screws, bolts, nuts, and related mounting hardware for marine electronics and rigging projects.

Compatibility & Installation

Consider fastener diameter, length, load, and the material being attached. Use appropriate backing or reinforcement where the installation requires it.

Rigging Notes

FROM THE SHOP

Drilling into Fiberglass

Use a sharp drill bit and start drilling in reverse to get through the gel coat. Once you're through that top layer, switch to forward and finish drilling the hole.

Don't Forget to Chamfer

Finish the hole with a chamfer bit to slightly bevel the edge of the gel coat. This helps prevent cracking around the hole down the road.

Chamfered edge Gel coat Fiberglass Hole
A small chamfer removes the sharp gel coat edge.

Take It Easy on Stainless Fasteners

When tightening stainless fasteners, it's best to use hand tools. Stainless steel is prone to galling, and tightening too fast can build up heat and cause the threads to seize. Once that happens, you're in for a frustrating time.

A Little Anti-Seize Goes a Long Way

If your project requires stainless fasteners, applying a small amount of anti-seize to the threads can help prevent galling.

Anti-Seize Lubricant 1 OZ
Handy to Have in the Shop
Anti-Seize Lubricant - 1 oz
Check it out →

Recently Viewed Products