Live Sonar

Lowrance ActiveTarget™2 kit Includes Module,Transducer with 7.62 m (25 ft) cable, and MountsModel: 000-15959-001 High-resolution, live action image...

Hummminbird Mega Live ImagingModel: 710304-1 Get the clarity and detail of MEGA Imaging+ in real time, up to 150 feet down and around your boat. Se...

Garmin Panoptics Livescope PlusModel: 010-02706-00 See images clearly with improved screen clarity, transducer sensitivity and target separation. S...

Garmin LVS62 Transducer Only for Livescope XRModel: 010-02719-10 Explore the deep with an extended range up to 500’ in freshwater and 350’ in saltw...

This assembly has a base that mounts to either a 7/8 or 1 inch rail. The 1.125" carbon fiber vertical pole is 60" and  Aluminum Cross Shaft is 14"....

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

This assembly comes with a BASE ONLY.  The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT...

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

If you already have CT360 pole and Tri-Stand.  This would be the assembly you would select to transition the CT-360 pole to the boat.  This assembl...

This assembly comes with a BASE ONLY.  The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT...

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

Rail base that will mount on 7/8 or 1 inch rails. The plastic insert is used for the 7/8” rails. 

This is a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech t...

The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT360 Pontoon mount or to a plate for int...

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

This is a two pole mount on one 14" aluminum cross shaft and a base.  One pole is the CT360 72" pole with tilt handle which the forward facing sona...

3”x 5.5” Track plate only. The track slides into any 3” track,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech

Rail bottom w/ plastic sleeve  attaches to the CT360 base to mount on a rail.  This will work on a 7/8" and 1" rails.  Use the plastic sleeve on 7/...

The extension plate is drill and tapped to fit the CT360 base.  This is used with sport tracks on boat with wide gunnels.  Four Screws are included...

ONE TILT HANDLE ADAPTOR COMES STANDARD WITH EVERY POLE PURCHASED.   THIS ALLOWS YOU TO TILT THE HANDLE IN 180 DEGREES, GREAT FOR STORAGE AND MAKES ...

Adjustable Live View Mount works with Garmin, Lowrance and Humminbird forward facing transducers.  It attaches with a 1/4 X 20 stainless steel bolt...

The 5" - 3" Riser has indicator lines and pre-drilled holes to easy cut the riser to 4" or 3".  The top and bottom plates are attached with stainle...

The Pontoon Mounts clamps securely onto square rails, NO holes drilled.    The CT360 base mounted to the top of this mount. The maximum rail size 1...