Poles and Accessories

Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fis...

Lowrance Scout Wide Bracket for ActivveTarget2Model: 000-15960-001The ActiveTarget® 2 Scout™ wide bracket is a non-adjustable bracket arm that hold...

Garmin Perspective Mount for LVS62Model: 010-13248-00The perspective mode mount takes your LiveScope™ XR real-time scanning sonar to the next level...

garmin Bulkhead Connector kitModel: 010-13350-00Flush-mount your LiveScope™ extension cable so you can quickly connect and disconnect your LiveScop...

The ADAPTER is used to attach two sections of the CT360 pole together.  This can be used for open water or ice fishing.  One side is attached with ...

This is a rod holder mount. THE BASE IS NOT INCLUDED. Please order part number 1005.  This fits Scottie and Ram rail mount rod holders,  Older styl...

The Pontoon Mounts clamps securely onto square rails, NO holes drilled.    The CT360 base mounted to the top of this mount. The maximum rail size 1...

The 5" - 3" Riser has indicator lines and pre-drilled holes to easy cut the riser to 4" or 3".  The top and bottom plates are attached with stainle...

Adjustable Live View Mount works with Garmin, Lowrance and Humminbird forward facing transducers.  It attaches with a 1/4 X 20 stainless steel bolt...

ONE TILT HANDLE ADAPTOR COMES STANDARD WITH EVERY POLE PURCHASED.   THIS ALLOWS YOU TO TILT THE HANDLE IN 180 DEGREES, GREAT FOR STORAGE AND MAKES ...

The extension plate is drill and tapped to fit the CT360 base.  This is used with sport tracks on boat with wide gunnels.  Four Screws are included...

Rail bottom w/ plastic sleeve  attaches to the CT360 base to mount on a rail.  This will work on a 7/8" and 1" rails.  Use the plastic sleeve on 7/...

3”x 5.5” Track plate only. The track slides into any 3” track,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech

This is a two pole mount on one 14" aluminum cross shaft and a base.  One pole is the CT360 72" pole with tilt handle which the forward facing sona...

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT360 Pontoon mount or to a plate for int...

This is a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech t...