Skip to content

Brew City

Filters

$
$

Brew City 3” X 5” Track Plate

Original price $40.00 - Original price $40.00
Original price
$40.00
$40.00 - $40.00
Current price $40.00

3”x 5.5” Track plate only. The track slides into any 3” track,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech

Brew City 4” X 6” Extension Plate

Original price $50.00 - Original price $50.00
Original price
$50.00
$50.00 - $50.00
Current price $50.00

The extension plate is drill and tapped to fit the CT360 base.  This is used with sport tracks on boat with wide gunnels.  Four Screws are included...

View full details

Brew City 5” - 3” Riser

Original price $90.00 - Original price $90.00
Original price
$90.00
$90.00 - $90.00
Current price $90.00

The 5" - 3" Riser has indicator lines and pre-drilled holes to easy cut the riser to 4" or 3".  The top and bottom plates are attached with stainle...

View full details

Brew City 60” Pole w/ Tilt Handle and Base

Original price $335.00 - Original price $335.00
Original price
$335.00
$335.00 - $335.00
Current price $335.00

This assembly comes with a BASE ONLY.  The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT...

View full details

Brew City 60” Pole w/ Tilt Handle, Base, and 3” X 5” Track Insert

Original price $375.00 - Original price $375.00
Original price
$375.00
$375.00 - $375.00
Current price $375.00

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

View full details

Brew City 60” Pole w/ Tilt Handle, Base, and Rail Bottom

Original price $350.00 - Original price $350.00
Original price
$350.00
$350.00 - $350.00
Current price $350.00

This assembly has a base that mounts to either a 7/8 or 1 inch rail. The 1.125" carbon fiber vertical pole is 60" and  Aluminum Cross Shaft is 14"....

View full details

Brew City 72" Pole w/ Tilt Handle and Base

Original price $345.00 - Original price $345.00
Original price
$345.00
$345.00 - $345.00
Current price $345.00

This assembly comes with a BASE ONLY.  The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT...

View full details

Brew City 72” Pole w/ Tilt Handle, Base, and 3"x5" Track Insert

Original price $385.00 - Original price $385.00
Original price
$385.00
$385.00 - $385.00
Current price $385.00

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

View full details

Brew City 72” Pole w/ Tilt Handle, Base, and Rail Bottom

Original price $365.00 - Original price $365.00
Original price
$365.00
$365.00 - $365.00
Current price $365.00

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

View full details

Brew City Adjustable Live View Mount

Original price $90.00 - Original price $90.00
Original price
$90.00
$90.00 - $90.00
Current price $90.00

Adjustable Live View Mount works with Garmin, Lowrance and Humminbird forward facing transducers.  It attaches with a 1/4 X 20 stainless steel bolt...

View full details

Brew City Base and 3"x5" Track Insert

Original price $135.00 - Original price $135.00
Original price
$135.00
$135.00 - $135.00
Current price $135.00

This is a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech t...

View full details

Brew City Base and Rail Bottom

Original price $115.00 - Original price $115.00
Original price
$115.00
$115.00 - $115.00
Current price $115.00

Rail base that will mount on 7/8 or 1 inch rails. The plastic insert is used for the 7/8” rails. 

Brew City Base Only

Original price $95.00 - Original price $95.00
Original price
$95.00
$95.00 - $95.00
Current price $95.00

The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT360 Pontoon mount or to a plate for int...

View full details

Brew City Dual Pole Mount 72" Pole w/ Tilt Handle and Base

Original price $545.00 - Original price $545.00
Original price
$545.00
$545.00 - $545.00
Current price $545.00

This is a two pole mount on one 14" aluminum cross shaft and a base.  One pole is the CT360 72" pole with tilt handle which the forward facing sona...

View full details

Brew City Humminbird 360 Add-On w/ Base and 3"x5" Track Insert

Original price $280.00 - Original price $280.00
Original price
$280.00
$280.00 - $280.00
Current price $280.00

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

View full details

Brew City Humminbird 360 Base

Original price $240.00 - Original price $240.00
Original price
$240.00
$240.00 - $240.00
Current price $240.00

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

View full details

Brew City Humminbird 360 Mount w/ Base and Rail Bottom

Original price $255.00 - Original price $255.00
Original price
$255.00
$255.00 - $255.00
Current price $255.00

If you already have CT360 pole and Tri-Stand.  This would be the assembly you would select to transition the CT-360 pole to the boat.  This assembl...

View full details

Brew City Pontoon Mount Square Rail

Original price $70.00 - Original price $70.00
Original price
$70.00
$70.00 - $70.00
Current price $70.00

The Pontoon Mounts clamps securely onto square rails, NO holes drilled.    The CT360 base mounted to the top of this mount. The maximum rail size 1...

View full details

Brew City Rail Bottom w/ Plastic Insert

Original price $18.00 - Original price $18.00
Original price
$18.00
$18.00 - $18.00
Current price $18.00

Rail bottom w/ plastic sleeve  attaches to the CT360 base to mount on a rail.  This will work on a 7/8" and 1" rails.  Use the plastic sleeve on 7/...

View full details

Brew City Rod Holder Mount

Original price $70.00 - Original price $70.00
Original price
$70.00
$70.00 - $70.00
Current price $70.00

This is a rod holder mount. THE BASE IS NOT INCLUDED. Please order part number 1005.  This fits Scottie and Ram rail mount rod holders,  Older styl...

View full details

Brew City Tilt Handle Assembly

Original price $40.00 - Original price $40.00
Original price
$40.00
$40.00 - $40.00
Current price $40.00

ONE TILT HANDLE ADAPTOR COMES STANDARD WITH EVERY POLE PURCHASED.   THIS ALLOWS YOU TO TILT THE HANDLE IN 180 DEGREES, GREAT FOR STORAGE AND MAKES ...

View full details