Products

3”x 5.5” Track plate only. The track slides into any 3” track,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech

The extension plate is drill and tapped to fit the CT360 base.  This is used with sport tracks on boat with wide gunnels.  Four Screws are included...

The 5" - 3" Riser has indicator lines and pre-drilled holes to easy cut the riser to 4" or 3".  The top and bottom plates are attached with stainle...

This assembly comes with a BASE ONLY.  The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT...

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

This assembly has a base that mounts to either a 7/8 or 1 inch rail. The 1.125" carbon fiber vertical pole is 60" and  Aluminum Cross Shaft is 14"....

This assembly comes with a BASE ONLY.  The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT...

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

This assembly has a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or T...

Adjustable Live View Mount works with Garmin, Lowrance and Humminbird forward facing transducers.  It attaches with a 1/4 X 20 stainless steel bolt...

This is a base mounted on a 3”x 5.5” plate that slides into any 3” track system,(inside dimension) for example, Cisco, Berts, Cannon or Trax Tech t...

Rail base that will mount on 7/8 or 1 inch rails. The plastic insert is used for the 7/8” rails. 

The Base can be mounted directly to the boat, to the CT360 Scottie/Ram Holder mount, the CT360 Riser, the CT360 Pontoon mount or to a plate for int...

This is a two pole mount on one 14" aluminum cross shaft and a base.  One pole is the CT360 72" pole with tilt handle which the forward facing sona...

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

If you allready have CT360 pole and Tri-Stand. This would be the assembly you would select to transition the CT-360 pole to the boat. This assembly...

If you already have CT360 pole and Tri-Stand.  This would be the assembly you would select to transition the CT-360 pole to the boat.  This assembl...

The Pontoon Mounts clamps securely onto square rails, NO holes drilled.    The CT360 base mounted to the top of this mount. The maximum rail size 1...

Rail bottom w/ plastic sleeve  attaches to the CT360 base to mount on a rail.  This will work on a 7/8" and 1" rails.  Use the plastic sleeve on 7/...